REDFLY Driver Download

Over the Air Setup

Note: Cell phone data rates will apply to this download.
The Over the Air Method is for downloading directly to your phone. If you are installing from your computer, see the instructions in the section below.

1. Select the Over the Air Installation link.
2. Accept the End User License Agreement and click Download.
   
3. Confirm that the box marked Open File After Download is checked.
   
4. Choose "Yes" to download and run the install file on your smartphone.
   
5. Follow the onscreen directions to complete the installation.

Installing from your Computer

You can also setup the REDFLY using your PC with an Internet connection. This requires Microsoft ActiveSync (or "Windows Mobile Device Center for Microsoft Vista") on your PC. (If you have not used ActiveSync or Device Center before, please refer to your phone's manual for instructions.)

1. Run ActiveSync (or Device Center) on your PC.
2. Power on your smartphone and connect it to your PC using your USB connecting cable.
3. ActiveSync (or Device Center) will automatically find your phone and say "Connected".
4. Select the Installing From Your Computer link.
5. Accept the End User License Agreement and click "Download".
6. Click Run.
7. Click Run again.
8. If you want to include the REDFLY User’s Guide in your download, check the box.
   (This will place a copy of the Guide in the My Documents folder on your PC.)
9. Click "Install".
10. Follow the onscreen instructions on your PC and your phone to complete the installation.

REDFLY Firmware Update

An enhanced version of the REDFLY firmware is now available. Current users of the REDFLY need to install this updated firmware on the device (unless your REDFLY firmware is version 1.3.29 or later) to enjoy these improvements.

To check which version of firmware you have on your REDFLY:

1. Power on your REDFLY.
   
2. Press the FN Function key and the REDFLY key at the same time. The About REDFLY screen appears.
   
3. Look at the FW Version field. If this Version field shows a calendar date or a number prior to 1.3.29, you must upgrade your REDFLY's firmware.

Updating Your REDFLY's Firmware

Updating your REDFLY is similar to installing software on your phone. However, if you are not comfortable with this procedure after reviewing these steps and would like assistance in performing this update, or if you encounter any difficulties during the update process, please call us at 1-888-4REDFLY.

You will need these to do the update:

• Your phone
• Your PC with an active Internet connection OR such a connection on your phone
• Your phone's USB connecting cable
• Your REDFLY with its AC adapter
  

Note: Please ensure your REDFLY device is plugged into its power adapter before beginning the update. If your REDFLY battery dies during the firmware update process, the device may not function properly.

To do an Over-the-Air update on your phone, proceed to Step 1. To do an update using your PC, skip to Step 6.

1. Use your phone browser to go http://www.celiocorp.com/install/mobile. Locate the Firmware section and choose to the Over the Air installation link.  (Data rates will apply for this download.)
2. Accept the End User License Agreement and choose Accept & Download.
3. Uncheck the box marked Open File After Download.
4. Choose Save As and select a convenient folder to save this file to on your phone.
5. Choose Save. Skip to Step 14.
6. Use your PC browser to go to http://www.celiocorp.com/install. Locate the Firmware section and choose to download the latest REDFLY firmware .CAB link.
7. Accept the End User License Agreement and choose Accept & Download.
8. Uncheck the box marked Open File After Download.
9. Choose Save As and select a convenient folder to save this file to on your PC.
10. Choose Save.
11. Run ActiveSync (or Device Center on Vista) on your PC.
12. Connect your phone to your PC using the phone’s USB connecting cable.
13. Use ActiveSync or Device Center to copy the CAB file from your PC to your phone.
14. Plug in your REDFLY AC adapter into an outlet and into your REDFLY.
15. Power on your REDFLY.
    
    Do NOT have your phone and your REDFLY connected right now. If it is, the firmware setup program will ask you to disconnect the REDFLY first before continuing.
    
    Perform the following steps on your phone:
16. Run the RFDFirmware.CAB file on your phone.
17. The setup program will now ask you to connect your REDFLY to your phone. Connect it to your phone using your phone’s USB connecting cable.
18. Select OK on your phone to continue the firmware installation.
19. Select OK when the firmware installation completes.
20. Your REDFLY will reset and automatically connect to your phone over USB.
    

Click Here to download the latest REDFLY firmware .CAB file.

Note: You can run the firmware updater from the same phone for multiple REDFLY's. You'll want to run the firmware update against all REDFLY devices you have.